# routing to aux question

**URL:** <https://discussion.ntrack.com/t/routing-to-aux-question/15497>\
**Category:** n-Track Studio Discussion Forum\
**Created:** [February 18, 2012, 6:15pm UTC](https://discussion.ntrack.com/t/routing-to-aux-question/15497 "2012-02-18T18:15:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![moggy2](https://discussion.ntrack.com/letter_avatar_proxy/v4/letter/m/6f9a4e/32.png) [@moggy2](https://discussion.ntrack.com/u/moggy2)\
**Post date:** [February 18, 2012, 6:15pm UTC](https://discussion.ntrack.com/t/routing-to-aux-question/15497/1 "2012-02-18T18:15:54Z")

</div>



---

<div class="post-metadata">

**Author:** ![moggy2](https://discussion.ntrack.com/letter_avatar_proxy/v4/letter/m/6f9a4e/32.png) [@moggy2](https://discussion.ntrack.com/u/moggy2)\
**Post date:** [February 18, 2012, 6:15pm UTC](https://discussion.ntrack.com/t/routing-to-aux-question/15497/2 "2012-02-18T18:15:54Z")

</div>

Hi guys, just wanted to check I’m not going mad here.  
  
You can change the output of a channel to be an aux but it wont work. The only way to get a signal onto an aux channel is by using channel sends. Is that right or have I missed some routing option somewhere?  
  
Thanks

---

<div class="post-metadata">

**Author:** ![dontcare](https://discussion.ntrack.com/letter_avatar_proxy/v4/letter/d/a183cd/32.png) [@dontcare](https://discussion.ntrack.com/u/dontcare)\
**Post date:** [February 19, 2012, 3:11am UTC](https://discussion.ntrack.com/t/routing-to-aux-question/15497/3 "2012-02-19T03:11:27Z")

</div>

I do not know to much about AUX or I would tell ya.  
  
I found this in a search here,[AUX](http://forum.ntrack.com/cgi-bin/ikonforum/index.cgi?act=ST;f=1;t=9954;hl=aux+and+routing) and learned a thing or two about it myself. ![:agree:](http://ntrack.com/ikfiles/non-cgi/emoticons/thumb_up.gif)   
  
dontcare ![:cool:](http://ntrack.com/ikfiles/non-cgi/emoticons/cool.gif)
