# Version recommendation

**URL:** <https://discussion.ntrack.com/t/version-recommendation/8305>\
**Category:** n-Track Studio Discussion Forum\
**Created:** [January 31, 2006, 3:13pm UTC](https://discussion.ntrack.com/t/version-recommendation/8305 "2006-01-31T15:13:54Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![hablesco](https://discussion.ntrack.com/letter_avatar_proxy/v4/letter/h/a88e4f/32.png) [@hablesco](https://discussion.ntrack.com/u/hablesco)\
**Post date:** [January 31, 2006, 3:13pm UTC](https://discussion.ntrack.com/t/version-recommendation/8305/1 "2006-01-31T15:13:54Z")

</div>



---

<div class="post-metadata">

**Author:** ![hablesco](https://discussion.ntrack.com/letter_avatar_proxy/v4/letter/h/a88e4f/32.png) [@hablesco](https://discussion.ntrack.com/u/hablesco)\
**Post date:** [January 31, 2006, 3:13pm UTC](https://discussion.ntrack.com/t/version-recommendation/8305/2 "2006-01-31T15:13:54Z")

</div>

I am trying to set up my laptop for using n-track, as my wife is complaining about me overtaking our desktop. I am planning on using an older version of n-track…Any suggestions on which build? My laptop is a Compaq presario 700 with an AMD Duron processor running at 697 MHZ  
it has 240 mb of ram and a 16 gig hard drive. Windows XP…  
Thanks for any help you can offer or experiences you’ve had…I will also be using an m-audio USB fast track as my soundcard-interface…thanks again

---

<div class="post-metadata">

**Author:** ![nick](https://discussion.ntrack.com/letter_avatar_proxy/v4/letter/n/f9ae1b/32.png) [@nick](https://discussion.ntrack.com/u/nick)\
**Post date:** [January 31, 2006, 3:40pm UTC](https://discussion.ntrack.com/t/version-recommendation/8305/3 "2006-01-31T15:40:49Z")

</div>

Hi ,I use a very old version Ver 2.3 on an 800Mhz celeron and for me it works very well. Its the second oldest one on the old downloads page.  
  
[http://ntrack.com/\_\_old\_download.shtm](http://ntrack.com/__old_download.shtm)  
  
Nick

---

<div class="post-metadata">

**Author:** ![Doug\_W](https://discussion.ntrack.com/letter_avatar_proxy/v4/letter/d/c5a1d2/32.png) [@Doug\_W](https://discussion.ntrack.com/u/Doug_W)\
**Post date:** [January 31, 2006, 6:50pm UTC](https://discussion.ntrack.com/t/version-recommendation/8305/4 "2006-01-31T18:50:46Z")

</div>

My PIII 500 Mhz IBM desktop with 256 Meg of RAM, 20 gig HDD ran version 3.3 fine.

---

<div class="post-metadata">

**Author:** ![woxnerw](https://discussion.ntrack.com/letter_avatar_proxy/v4/letter/w/d07c76/32.png) [@woxnerw](https://discussion.ntrack.com/u/woxnerw)\
**Post date:** [February 1, 2006, 3:21am UTC](https://discussion.ntrack.com/t/version-recommendation/8305/5 "2006-02-01T03:21:29Z")

</div>

Hi:  
 I think if you could find a 1980 build… You may be in good shape… I’m not sure of the Version … But if you look, I think you’ll find that one posted up there…   
  
 Bill…  
  
[EDIT]  
 I have build 2042 working just fine on a P-111 1.2 mhz. 512 meg. XP Desk… DAW… But ya gotta have .netframwork 2.2 installed… The BIG Download should contain all the necessary files, needed to install it… It’s a 30 meg. download.

---

<div class="post-metadata">

**Author:** ![Doug\_W](https://discussion.ntrack.com/letter_avatar_proxy/v4/letter/d/c5a1d2/32.png) [@Doug\_W](https://discussion.ntrack.com/u/Doug_W)\
**Post date:** [February 1, 2006, 2:46pm UTC](https://discussion.ntrack.com/t/version-recommendation/8305/6 "2006-02-01T14:46:20Z")

</div>

Mr. Bill,  
  
Have you sorted out all your computer woes? With the PIII and build 2042, do you record strictly 16 bit or are you messing with 24 bit?  
  
Doug

---

<div class="post-metadata">

**Author:** ![woxnerw](https://discussion.ntrack.com/letter_avatar_proxy/v4/letter/w/d07c76/32.png) [@woxnerw](https://discussion.ntrack.com/u/woxnerw)\
**Post date:** [February 1, 2006, 5:28pm UTC](https://discussion.ntrack.com/t/version-recommendation/8305/7 "2006-02-01T17:28:06Z")

</div>

Hi Doug:  
 It has recoverd… somewhat… The issues I had and build was installing 2042 on the '98SE partitions of the Studio computers… The XP partitions up-graded to 2042 with no issues…   
  
 I licked my wounds and reverted back to build 2037 on the '98SE partitions… However, the day I ran into the install issues… I was stuck… I wasn’t able to revert back to build 2037 on that day… I have no knowledge to explain why… but after letting the dust settle for a few days …and when I attempted the re-install again I am now at build 2037 on the '98SE Desks and at build 2042 on the XP desks…   
  
 I haven’t done any tracks sessions sense… But any tracks that I was working with seem to work just fine with both XP and '98SE desks.   
  
 I have downloaded v 4.1.6 build 2044 and I have that build on my Editing machine… It appears to run just fine and with no issues… so far… All with the current project I’m working with…   
  
 The only desks I can track 24-bit .wav files with is… with the P-111 '98SE desk and the XP partition of the same P-111… I have a tracking issue with the P-4, and '98SE desk… at the moment… That is the machine that the Lexicon Core-32 hardware resides… on… I am able to repro with that hardware… but I am unable to track with that hardware… Some small issue that I’m unabe to see through… That Lexicon Core hardware has very _Flakey_ Drivers… When they work, there is no issues and the set-up works flawlessly… but only with '98SE as it’s Desk…   
  
 Bill…

---

<div class="post-metadata">

**Author:** ![billelder](https://discussion.ntrack.com/letter_avatar_proxy/v4/letter/b/85f322/32.png) [@billelder](https://discussion.ntrack.com/u/billelder)\
**Post date:** [February 2, 2006, 9:40am UTC](https://discussion.ntrack.com/t/version-recommendation/8305/8 "2006-02-02T09:40:33Z")

</div>

I’m running ver 3.3 with no problems. Works great, sounds great!
